 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| DATA SHEET 1SMB5926~1SMB5939 GLASS PASSIVATED JUNCTION SILICON ZENER DIODES VOLTAGE FEATURES * Low profile package * Low inductance .083(2.11) .075(1.91) .155(3.94) .130(3.30) 11 to 39 Volts POWER 1.5 Watts SMB/DO-214AA Unit: inch (mm) * Built-in strain relief * Plastic package has Underwriters Laboratory Flammability Classification 94V-O * Both normal and Pb free product are available : Normal : 80~95% Sn, 5~20% Pb Pb free: 99% Sn above can meet Rohs environment substance directive request .096(2.44) .185(4.70) .160(4.06) .012(.305) .006(.152) .083(2.13) MECHANICALDATA Case: JEDEC DO-214AA, Molded plastic over passivated junction Terminals: Solder plated, solderable per MIL-STD-202G, Method 208 Polarity: Indicated by cathode band Standard packaging: 12mm tape (EIA-481) Weight: 0.003 ounce, 0.093 gram .050(1.27) .030(0.76) .008(.203) .002(.051) .220(5.59) .200(5.08) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25C ambient temperature unless otherwise specified. P ar m et r a e D C P ow erD i si aton on TA =75 O C , easur atZer Lead Lengt spi M e o h D er t above 75O C (N O TE 1) ae O per tng Juncton and S t r geTem per t r R ange ai i oa aue S ym bol Val e u 1. 5 - 5 t +150 5o U nis t W ats t O PD TJ ,TSTG C NOTES: 1.Mounted on 5.0mm2 (.013mm thick) land areas. STAD-NOV.05.2004 PAGE . 1 Part Number Marking Code VZ @ IZT Maximum Zener Impedance ZZT @ IZT ZZK @ IZK O mA Maximum Leakage Current IR @VR uA V Package Nom. V Min. V Max. V 1.5 Watt ZENER DIODES 1SMB5926 1SMB5927 1SMB5928 1SMB5929 1SMB5930 1SMB5931 1SMB5932 1SMB5933 1SMB5934 1SMB5935 1SMB5936 1SMB5937 1SMB5938 1SMB5939 926B 927B 928B 929B 930B 931B 932B 933B 934B 935B 936B 937B 938B 939B 11.0 12.0 13.0 15.0 16.0 18.0 20.0 22.0 24.0 27.0 30.0 33.0 36.0 39.0 10.5 11.4 12.4 14.3 15.2 17.1 19.0 20.9 22.8 25.7 28.5 31.4 34.2 37.1 11.6 12.6 13.7 15.8 16.8 18.9 21.0 23.1 25.2 28.4 31.5 34.7 37.8 41.0 O mA 5.5 6.5 7.0 9.0 10.0 12.0 14.0 17.5 19.0 23.0 26.0 33.0 38.0 45.0 34.1 31.2 28.8 25.0 23.4 20.8 18.7 17.0 15.6 13.9 12.5 11.4 10.4 9.6 550 550 550 600 600 650 650 650 700 700 750 800 850 900 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 8.4 9.1 9.9 11.4 12.2 13.7 15.2 16.7 18.2 20.6 22.8 25.1 27.4 29.7 SMB SMB SMB SMB SMB SMB SMB SMB SMB SMB SMB SMB SMB SMB STAD-NOV.05.2004 PAGE . 2 qvz, TEMPERATURE COEFICENT (mV/ OC) MAXIMUM POWER DISSIPATION, Watts 2.5 2 1.5 1 0.5 0 10 8 6 4 2 0 -2 -4 2 4 6 8 10 12 V @I Z ZT 0 20 40 60 80 100 120 140 150 180 LEAD TEMPERATURE, C O V , ZENER VOLTAGE (VOLTS) Z Fig.1 Steady State Power Derating Fig.2 Temperature coeeficient v.s. zener voltage,Vz(V) qvz, TEMPERATURE COEFICENT (mV/ OC) 200 100 70 50 30 20 10 10 20 30 50 V @I Z ZT Zz, DYNAMIC IMPEDANCE (OHMS) 1K 500 200 100 50 20 10 5 2 1 0.5 1 2 5 10 20 T = 25 O C J I (rms) =0.1 I (dc) Z Z 22V 12V 6.8V 50 100 200 500 Vz, ZENER VOLTAGE (VOLTS) Iz, ZENER TEST CURRENT (mA) Fig.3 Temperature coeeficient v.s. zener voltage,Vz(V) F i g . 4 Z ener impedance v.s. zener current 1K 200 100 70 50 30 20 10mA I Z (dc)=1mA Ppk, PEAKSURGE POWER (WATTS) Zz, DYNAMIC IMPEDANCE (OHMS) 500 300 200 100 50 30 20 10 0.1 0.20.3 0.5 RECTANGULAR NONREPETITIVE WAVEFORM O T J =25 C PRIOR TO INTIAL PULSE 10 7 5 3 2 20mA I Z (rms)=0.1I Z (dc) 5 7 10 20 3 0 40 50 60 70 100 1 23 5 10 20 30 50 100 Vz, ZENER VOLTAGE (VOLTS) PW, PULSE WIDTH (ms) F i g . 5 Z ener impedance v.s. zener voltage Fig.6 Maximum Surge Power STAD-NOV.05.2004 PAGE . 3 100 Iz, ZENER CURRENT (mA) 100 Iz, ZENER CURRENT (mA) 50 30 20 10 5 3 2 1 0.5 0.3 0.2 0.1 0 1 2 3 4 5 6 7 8 9 10 50 30 20 10 5 3 2 1 0.5 0.3 0.2 0 .1 0 10 20 30 40 Vz, ZENER VOLTAGE (VOLTS) Vz, ZENER VOLTAGE (VOLTS) Fig.7 Vz = 6.8 thru 10 Volts Fig.8 Vz = 12 thru 82 Volts NOTE 3. ZENER VOLTAGE (Vz) MEASUREMENT Nominal zener voltage is measured with the device function in thermal equilibrium with ambient O temperature at 25 C NOTE 4. ZENER IMPEDANCE (Zz) DERIVATION Zzt and Zzk are measured by dividing the ac voltage drop across the device by the accurrent applied. The specified limits are for Iz(ac) = 0.1 Iz, (dc) with the ac freqency = 60Hz STAD-NOV.05.2004 PAGE . 4 |
Price & Availability of 1SMB592604
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |